For Mercedes Vito Viano 2 W639 V639 Steering Wheel Radio Adapter

  

For Mercedes Vito Viano 2 W639 V639 Steering Wheel Radio Adapter. This product sheet has been automatically translated. If you have any questions, please do not hesitate to contact us.

Important note for customers outside the EU! The buyer is responsible for these charges.

Please specify this when ordering absolutely! Brand of the radio you want to install! We ask for your understanding.

With ISO plugs on the car side. And ISO plugs on the radio side.

If you have a factory audio system (separate factory amplifiers) it is via fiber optic cables. Is controlled by the factory radio, this will not be supported and there is no audio output to the car speakers.

In this case, you need an additional fiber optic adapter from us. Only for vehicles with interior CAN bus and with 10-pin ISO connector in the upper row of the ISO slot. And the following factory radios: -Audio 5 -Audio 10 -Audio 30 -APS (D2B) - command (for SL R230 with Command only if the plugs are suitable, which is usually only the case for foreign imports) 3. On some vehicles, the ISO connectors are intended for Power supply and not individual speakers, but firmly connected.

You need to use the ISO connector in the vehicle with a small Saw or separate wire cutter around the adapter to be able to connect. The plugs are still in place the original radio can be reconnected. Installation for the following vehicles. Vehicle model: Year of construction. B-Class (W245/T245) 06/2005 - 06/2011 - C-Class (W203) 01/2000 - 01/2005 - CLK-Class (C208/A208) 07/1999 - 05/2003 - E-Class (W210/S210) 06/1999 - 12/2002 - G-Class (W461/W463) 2001 - 2007 - SL-Class (R230) 08/2001 - 02/2006 - SLR (C199) 2003 - 12/2009 - Sprinter 2 (W906) 04/2006 - 05/2018 In the case of the Sprinter, connect the vehicle plugs with ours before purchasing Compare the figure.

The 10-pin ISO connector may not be present or have a Quadlock connector installed - Vito/Viano 2 (W639/V639) 04/2006 - 05/2014 In the case of the Vito and Viano, compare the plugs in the vehicle before purchase to our illustration. May not be present or have a Quadlock connector installed. The adapter provides the following signals. Ignition + duration + Dimension - Steering wheel lighting dimmer line Speaker signals Speed signal Reverse signal. You can reach us at the following times: Tuesday - Friday 10:00 - 18:00 Saturday 10:00 - 14:00.

Factory amplifiers have it via fiber optic cables is not supported and there is no audio output to the car speakers. In this case, you need an additional 2. Only for vehicles with interior CAN bus and with 10-pin ISO connector in the upper row of the ISO slot (for SL R230 with Command only if the plugs are suitable, which is usually only the case for foreign imports) you need to use the ISO connector in the vehicle with a small In the case of the Sprinter, connect the vehicle plugs with ours before purchasing Compare the figure. The 10-pin ISO connector may not.