LKC 30mm Aluminum Lift Kit Front Mercedes-Benz VITO VIANO Class V W638/W639

  

LKC® 30mm Alu Lift Kit Front - Mercedes-Benz VITO W639 VIANO Class V. LKC® 30mm Alu Lift Kit Front - Mercedes-Benz VITO / VIANO / Class V (W638/W639).

2 × aluminum spacers for front axle (30 mm). Complete mounting kit with screws and washers. Color: Red (Standard) or Black (on request). Example: effect of the LKC® lift - visibly more ground clearance and a more stable position. 1 More ground clearance and protection.

Easier traversal of off-road passages, deep grooves, curbs, ground thresholds, and bumps. Reduced risk of damage to the oil pan, exhaust system, and components under the vehicle floor. Less scraping on bumpers and wheel arches in steep entries and exits. Compensates for signs of spring settling and restores the vehicle's original height. Cost-effective compared to a major chassis conversion or larger wheels. Easy installation without deep modifications to the vehicle's structure. Available for a wide range of vehicle models. Less tilt when loading; more stable vehicle level. Balances the body when one axle is lower. Robust and confident appearance thanks to the slightly elevated vehicle position. 4 Note on the LiftKitCar® brand. LiftKitCar® (LKC®) represents carefully assembled lift kits with tested quality, precise selection, and clean packaging. All sets are checked and prepared by our team to ensure safe and reliable installation.

There are also lower-quality replicas on the market with insufficient strength or finish. Therefore, only purchase tested kits from the LiftKitCar® brand - Quality and Safety First. Warranty: 10 years on the material and processing of the LiftKitCar® kits we have produced.

In case of proven manufacturing defects, we offer a free replacement or a refund of the purchase price. Mercedes-Benz Class V (W638) · 1996 - 2003.

Mercedes-Benz Class V (W639) · 2003 - 2010. Mercedes-Benz VITO I (W638) · 1996 - 2003. Mercedes-Benz VITO II (W639) · 2003 - 2010. Mercedes-Benz VIANO (W638) · 1996 - 2003.

Mercedes-Benz VIANO (W639) · 2003 - 2010. Mercedes-Benz VALENTE (W639) · 2003 - 2010.

Example image: spacers/LKC® spacers - configurations according to your wishes. Material and height: Polyurethane (PU) and aluminum in 20 mm and 60 mm.

Colors: Red or black (standard: red). Choice of set: complete set or only Front Axle / only Rear Axle. Combinations: can be combined individually - for example, front 20 mm PU, rear 30 mm aluminum. Red (standard) · Black (on request). 2 × aluminum spacers (front axle) + mounting kit.

VITO / VIANO / V-Class / VALENTE (W638, W639). From Germany - excluding EU customs duties. Easy installation: Bolt-On - no welding, drilling, or modification required. Self-assembly: possible with basic knowledge; a specialized workshop is recommended. After installation: Recommended axle measurement (geometry and tire wear).

Assembly time: approximately 1 to 2 hours (depending on the model). In different countries - including Germany, Austria, France, Italy, Spain, Poland, the United Kingdom, the United States, Australia, and the United Arab Emirates - different national requirements apply to the approval and documentation of chassis modifications, for example, TÜV, ABE, DEKRA, DOT, etc. For the lift kits offered here with a moderate increase of up to approx.

30 mm, in many cases, separate TÜV acceptance is not necessary, provided that no safety modifications are made to the braking system, steering, or axle geometry. Note: Lifting more than 30 mm may require an individual approval depending on the region. Since regulations can be interpreted differently depending on the region, we always recommend consulting the relevant control body (TÜV, DEKRA, GTÜ) before making structural modifications to the vehicle. LiftKitCar® does not provide national TÜV or ABE certificates, as they are regulated individually based on the country, vehicle model, and version. Our aluminum and PU spacers are manufactured according to European quality standards and tested for fit and material strength. Note: Use is at the owner's own risk. Please check the legal requirements of your country or state before officially registering structural modifications. LiftKitCar®: ground clearance that does not compromise. Robustness and stability - made to overcome, not dodge. Official sponsor of the Sahara trip 2025 - LiftKitCar®.

The Sahara expeditions of Driven to Extremes take place every year and are open to all interested parties - participation possible even without prior experience. Not sure if the set fits? Send us your Vehicle Identification Number (VIN) - we will check the fit during working hours within the hour. Our LiftKitCar® team generally responds within 1 hour during working hours.

Service and support from LiftKitCar® - your absolute guarantee of results. We build relationships based on trust and responsibility. Each customer is more than an order to us - a partner. If the set does not fit perfectly, we offer a quick exchange or refund - clear, honest, and simple.

We accompany you to the result: from selection to successful installation. Tested in Europe and the Sahara - reliable even under heat, dust, and long-distance loads.

Easy installation and full OEM compatibility - bolted, without modification of original parts. Quality responsibility - LKC® is our product: we manufacture, test, and guarantee the sets. Collaboration only with manufacturers whose components harmonize perfectly - for reliability and longevity. Personal support - Assistance from selection to successful installation. Duty-free delivery throughout the EU - no additional fees within the European Union.

Orders are processed within 1-2 working days and handed over to logistics. Our shipments go out twice a week by mail in Germany and are delivered via DHL, DPD, or GLS.

Average delivery time in the EU: 5-12 working days. No additional customs fees or hidden costs. The stated price is the final total price in all EU member states.

If a shipment is lost or significantly delayed, we will reship the item at our expense and provide financial compensation. We guarantee that you will receive your order safely and that you will be satisfied with our service. If you decide not to install, you can return the item within 30 days. Returns are made to our German warehouse - not to Ukraine. This greatly simplifies and accelerates the process.

Return shipping costs are borne by the buyer. The merchandise must be in its original packaging and show no signs of installation. Refunds are processed after verification within 1-3 working days via the same payment method. LiftKitCar® - Premium Lift Kits 20-40 mm. European brand · Fast and duty-free delivery.