Mercedes Vito Viano

Sachs Front Shock Absorber for Mercedes Viano Vito


Sachs Front Shock Absorber for Mercedes Viano Vito

Sachs Front Shock Absorber for Mercedes Viano Vito   Sachs Front Shock Absorber for Mercedes Viano Vito

Sachs Front Shock Absorber for Mercedes Viano Vito. This product sheet has been automatically translated. If you have any questions, please feel free to contact us. Sachs front shock absorber for Mercedes Viano Vito. Delivery contents: 1 Sachs shock absorber at the front.

See technical information and vehicle chart. Parameter: SFE36/25X212A Shock absorber system: twin-tube Shock absorber type: gas pressure Shock absorber type: strut Additional article/Additional information: without spring Additional article/Additional information 2: without bearing Shock absorber mounting type: upper pin. Please check the compatibility of items BEFORE paying for an order. Once an order has been paid for, it is automatically shipped so that the goods reach you as quickly as possible. If you are unsure, send us your vehicle data BEFORE paying so we can check your order and correct it if necessary.

To check your order, we need the KBA number. From your registration certificate, the chassis number (E number) and the date of first registration. In some cases, additional information is required to reliably identify the required spare part. Saving on consumables such as paper and ink/toner helps save valuable environmental resources. Plus, you no longer have to worry about storing, filing, and searching for your invoice.

Please note that it is NOT possible to change the delivery address after payment, as we release and pass on orders directly for shipping. Information on the disposal of used oils from Renet Autoteile Netzwerk GmbH. Used oils are liquids that are both flammable and water-polluting. Oils must be deposited at a used oil collection point after use!

Improper disposal of used oils endangers the environment! Any addition of foreign substances such as solvents, brake fluids, and coolants is prohibited. Our mentioned used oil collection point accepts used engine or gear oils free of charge up to the amount of engine or gear oils returned on a case-by-case basis. Pro ReNet GmbH c/o Jakobs Wütschner GmbH John F. Kennedystrasse 7 55743 Idar-Oberstein In principle, used oils can also be returned to petrol stations or recycling collection points (e.

, recycling center; possibly) for a fee. You can usually find out if your local recycling collection point accepts used oils on-site or from the competent municipal information office. If necessary, we will also provide a place where you can dispose of your used oil. The following information is for those who use batteries and no longer resell them in the form provided to them (end users): 1.

Free return of used batteries Batteries must not be disposed of with household waste. You are legally obligated to return used batteries. As a battery distributor, we are required to take back used batteries (excluding products with installed used batteries), our take-back obligation being limited to used batteries of the type that we have or have used as new batteries in our range and the quantity that end-users typically dispose of. You can either return the old batteries to us with sufficient postage or hand them in free of charge directly to our shipping warehouse at the following address: Pro ReNet GmbH c/o Jakobs Wütschner GmbH John F.

Kennedystrasse 7 55743 Idar-Oberstein 2. Meaning of battery symbols Batteries bear the symbol of a crossed-out wheeled bin (see below). Contaminated batteries are specially marked with chemical symbols. For batteries that contain more than 0.0005 percent by mass of mercury, more than 0.002 percent by mass of cadmium, or more than 0.004 percent by mass of lead, the chemical name of the pollutant used is located below the trash can symbol - where "Cd" means cadmium, "Pb" means lead, and "Hg" means mercury. You can reread this information in the accompanying documents or in the manufacturer's instructions for use.

CDI 2.2 (639.811, 639.813, 639.815, 639.711, 639.713). Front axle mounting location for vehicles with standard chassis no. CDI 3.0 (639811, 639813, 639815). CDI 2.2 4-matic 639.811, 639.813, 639.815, 639.711...

Front axle mounting location for vehicles with standard chassis Check OE number for OE no. 639 320 60 13 for OE no.

639 320 66 13 for OE no. 639 320 68 13 for OE no.

639 320 69 13 for OE no. A 639 320 60 13 for OE no. A 639 320 66 13 for OE no. A 639 320 68 13 for OE no.

A 639 320 69 13. 3.2 (639.711, 639.811, 639.813). 3.2 (639.713, 639.813, 639.815).

CDI 2.2 (639711, 639713, 639811, 639813, 639815). CDI 2.0 (639711, 639713, 639811, 639813, 639815). CDI 2.0 4matic (639.713). CDI 2.2 4matic 639.711, 639.713, 639.811, 639.813... 3.5 (639811, 639813, 639815).

3.7 (639 811, 639 813, 639 815). 06.04 - 07.07. CDI 2.0 4-matic 639.711, 639.713, 639.811, 639.813... MERCEDES-BENZ VITO / MIXTO Van (W639). 111 CDI 4x4 (639601, 639603, 639605). 115 CDI 4x4 (639601, 639603, 639605). 06.04 - 07.08. 123 (639 601, 639 603, 639 605). 113 CDI 4x4 (639601, 639603, 639605). 116 CDI 4x4 (639601, 639603, 639605). E-CELL (639.601, 639.603, 639.605). Front axle mounting location for vehicles with standard chassis. 09.10 - 08.14. 116 CDI 4x4 (639701, 639703, 639705). 113 CDI 4x4 (639701, 639703, 639705). 109 CDI 4x4 (639.701).

09.07 - 08.14. 111 CDI 4x4 (639701, 639703, 639705).

115 CDI 4x4 (639.701, 639.705). Thank you for your interest in our products, your team of cheap car parts.


Sachs Front Shock Absorber for Mercedes Viano Vito   Sachs Front Shock Absorber for Mercedes Viano Vito