LKC 20mm PU Complete Lift Mercedes VITO / V-Class / Viano W447

  

LKC® 20 mm PU complete lift - Mercedes VITO / V-Class / Viano W447. LKC® 20mm PU Lift Kit - Mercedes VITO / V-Class / W447. Material: PU (Polyurethane) · Position: Front and rear axles · Height: 20 mm · Production: LKC® / LiftKitCar®. 2 × PU spacers (front axle, 20 mm). 2 × PU coil spacers (rear axle, 20 mm).

Mounting accessories (screws, nuts, washers). Color: Red (Standard) or Black (on request). Example: effect of LKC® lift - visibly more ground clearance and a more stable position.

1 More ground clearance and protection. Easier traversal of off-road passages, deep grooves, curbs, thresholds, and bumps. Reduced risk of damage to the oil pan, exhaust system, and components under the vehicle floor.

Less scraping on bumpers and wheel arches in steep entries and exits. Compensates for signs of spring sagging and restores the vehicle's original height. Economical compared to a major chassis conversion or larger wheels. Easy installation without deep modifications to the vehicle's construction.

Available for a wide range of vehicle models. Less tilt when loading; more stable vehicle level. Balances the body when one axle is lower.

Robust and confident appearance due to the slightly elevated position of the vehicle. 4 Note on the LiftKitCar® brand. LiftKitCar® (LKC®) represents carefully assembled lift kits with tested quality, precise selection, and clean packaging.

All sets are checked and prepared by our team to ensure safe and reliable installation. There are also lower-quality replicas on the market with insufficient strength or finish. Therefore, only buy tested kits from the LiftKitCar® brand - Quality and safety first. Warranty: 10 years on the material and processing of the LiftKitCar® kits we have manufactured.

In the event of proven manufacturing defects, we offer a free replacement or refund of the purchase price. Mercedes-Benz VITO (W447) · 2014-present. Mercedes-Benz V-Class (W447) · 2014-present. Mercedes-Benz Viano (W447) · 2014-present. Mercedes-Benz Marco Polo (W447) · 2014-present.

Mercedes-Benz Valente (W447) · 2014-present. Mercedes-Benz EQV (W447) · 2014-present. Mercedes-Benz Metris (W447) · 2014-present. Example image: LKC® spacers/spacers - configurations according to your wishes.

Material and height: Polyurethane (PU) and aluminum in 20 mm and 60 mm. Colors: Red or black (standard: red). Choice of set: complete set or only front axle / only rear axle. Combinations: can be individually combined - for example, front 20 mm PU, rear 30 mm aluminum.

Mercedes-Benz VITO / V-Class / W447. Red (standard) · Black (on request). 2 × front PU spacers + 2 × rear PU coil spacers + mounting accessories. Note - installation of front lift kits. In rare cases, it may be necessary for certain vehicle versions after installing the necessary front lift kits to use a shorter stabilizer coupling rod to ensure the correct suspension geometry.

If such a situation occurs during installation, please contact us - we will immediately provide you with the necessary technical indications as well as information on the appropriate spare part. This adjustment only concerns a few vehicles and is not necessary on all models.

Easy installation: Bolt-On - no welding, drilling, or modification. Self-assembly: possible with basic knowledge; a specialized workshop is recommended. After installation: Recommended axle measurement (geometry and tire wear).

Assembly time: about 1 to 2 hours (depending on the model). In different countries - including Germany, Austria, France, Italy, Spain, Poland, the UK, the USA, Australia, and the UAE - different national requirements apply to the approval and documentation of chassis modifications, for example, TÜV, ABE, DEKRA, DOT, etc. For the lift kits offered here with a moderate increase of up to approx.

30 mm, in many cases, separate TÜV approval is not necessary, provided that no safety modifications are made to the braking system, steering, or axle geometry. Note: for lifts over 30 mm, depending on the region, individual acceptance may be required. Since regulations can be interpreted differently depending on the region, we always recommend consulting the relevant inspection body (TÜV, DEKRA, GTÜ) before making structural modifications to the vehicle. LiftKitCar® does not provide national TÜV or ABE certificates, as these are regulated individually based on the country, vehicle model, and version. Our aluminum and PU spacers are manufactured according to European quality standards and tested for fit and material strength. Note: Use is at the vehicle owner's own risk. Please check the legal requirements of your country or state before officially registering structural modifications. LiftKitCar®: ground clearance that doesn't compromise. Robustness and stability - made to overcome, not avoid.

Official sponsor of the 2025 Sahara trip - LiftKitCar®. The Sahara expeditions of Driven to Extremes take place every year and are open to all interested persons - participation possible even without prior experience. Not sure if the set fits? Send us your chassis number (VIN) - we check the fit during working hours within the hour.

Our LiftKitCar® team generally responds within 1 hour during working hours. Service and support from LiftKitCar® - your absolute guarantee of results. We build relationships based on trust and responsibility. Every customer is more than an order to us - a partner. If the set does not fit perfectly, we offer a quick exchange or refund - clear, honest, and simple.

We accompany you to the result: from selection to successful installation. Tested in Europe and the Sahara - reliable even under heat, dust, and long-distance loads. Easy installation and complete OEM compatibility - bolted, without modification of original parts. Quality responsibility - LKC® is our product: we manufacture, test, and guarantee the sets. Collaboration only with manufacturers whose components fit perfectly - for reliability and longevity.

Personal support - assistance from selection to successful installation. Duty-free delivery throughout the EU - no additional costs within the European Union. Orders are processed within 1-2 business days and handed over to logistics. Our shipments go out twice a week via mail and will be delivered by DHL, DPD, or GLS. Average delivery time in the EU: 5-12 business days.

No additional customs fees or hidden costs. The listed price is the total final price in all EU member states. If a shipment is lost or significantly delayed, we will reship the item at our expense and provide financial compensation. We guarantee that you will receive your order safely and be satisfied with our service. If you decide not to install, you can return the item within 30 days.

Returns are made to our German warehouse - not to Ukraine. This greatly simplifies and accelerates the process. Return shipping costs are borne by the buyer. The merchandise must be in the original packaging and show no signs of installation. Refunds are made after verification within 1-3 business days by the same payment method.

LiftKitCar® - Premium Lift Kits 20-40 mm. European brand · Fast and duty-free delivery.